Kluslijst Lasers 2019-2020

Uit EurosWiki
Versie door Mabakker (overleg | bijdragen) op 3 jun 2020 om 17:33 (→‎New Laser)
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)
Naar navigatie springen Naar zoeken springen

Op deze pagina staat de kluslijst voor Laser Standard, Laser 2 en volgboot voor het klusseizoen 2019-2020.

Overview

An overview of the staus of each boat is presented in the following excel sheet: Bestand:Laser Maintenance19-20.xlsx This sheet also contains a table of spare parts to be bought.

Below is a list of some of the maintenance to be done.

Laser Standard

Maintenance Jobs are split by hull.

On one hull there is a missing camcleat fairlead, buy a new one and fix.

Barely Legal

18. Wit

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Use "Ontweeringswater"
2 Fix Tip: Fill the hole with filler and paint with DD - Michiel, Freddy, Niels Ongoing
3 Reattach Drain Plug - Niels Done
4 Attach/Replace Self Bailer Done
5 Attach New Hiking Strap and Bungee - Done
6 Place Teflon Mast Step - Done
7 Check deck cleats and plates; tighten -
8 Sand down deck repairs - Niels Done
9 Fix Cockpit hole: Cover with fibergalss and epoxy, paint with DD - Begun

After Eighteen

19. Groen

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Bottom still to do Use "Ontweeringswater"
2 Attach/Replace Self Bailer Done
3 Check Hiking Strap Bungee - Done
4 Place Teflon Mast Step - Done
5 Check deck cleats and plates; tighten - Done

Kusje Kusje

20. Rood

# Job Spare Parts to buy Name Status Comments
1 Fix Tip: Fill the hole with filler and paint with DD - Michiel, Niels, Freddy Fill tip with filler
2 Attach/Replace Self Bailer Done
3 Attach New Hiking Strap and Bungee - Done
4 Place Teflon Mast Step - Done
5 Check deck cleats and plates; tighten -

New Laser

21. Groen, glad dek.

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Use "Ontweeringswater"
2 Attach/Replace Self Bailer Done
3 Reattach Hiking Strap Eyestraps at back of cockpit -
4 Place Teflon Mast Step - Done
5 Attach Cunningham Carabiner -
6 Check deck cleats and plates; tighten -
7 Think of a fun name! -

Spars, Foils, Other

For maintenance tracking purposes all foils and spars have a number associated with them (e.g. "Mast 1"). This number is written on masking tape somewhere on said part. If you have to remove this sticker, reattach it as soon as possible!

# Job Spare Parts to buy Name Status Comments
1 Wash Wetsuits - Laura Done
2 Mast 1: Replace Top section bottom bracket Said Bracket
3 Boom 3: Replace Clew Strap Done
4 Sail 4: New Battens Done
5 Centerboard 1 and 3: Fill in holes - Freddy Done Coated with Pantsercoat
6 Boom 4: New Mainsheet Done
7 Put last rudder back together Not all attachments fit every rudder. If it doesn't fit, take apart other ones and find the combination that fits.

Coach Boat

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Niels Done
2 Plug Front Hole - Menno Done Possibly find a plug that fits
3 Fix deck holes - Use plastic strips and heat gun
4 Install Rear Drain Plug - Done Kasper

Laser II

Look though inventory and assess what needs to be done to get one or two sailing again.

Zie ook